home >> under car tools >> disc brake piston remover
   

DISC BRAKE PISTON REMOVER

Item No. AMR450L

Item No:
AMR450L

Material :
Head: SCM4140, Heat-treatment 38-45° , chrome plated.

Size:
Weight: 90g ±5g

Packing:
SLIDE CARD
144PC/16.00KG/17.00KG/0.90'/CTN

DISC BRAKE PISTON REMOVER

Instruction:

  • Remove caliper from rotor.

  • Remove both brake pads. If repairs are to be done off the car, hold caliper in vise.

  • Inspect piston to determine which face of tool will provide best engagement.

  • Engage tips of tool in holes or slots in piston.

  • Turn piston while exerting inward pressure on piston. Note the movement of piston to be sure that it is retracting into the caliber. Some pistons are actuated by left-hand threads. Continue to turn the piston until it bottoms out.

  • Place pads in caliper and check for 1/16" maximum clearance from rotor. A clearance greater than 1/16" may allow the adjuster to be pulled out of the piston when the service brake is applied. If clearance exceeds 1/16", engage and rotate the piston to reduce the clearance.


Description:

  • Designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes

Related Products:

AMR674C: UNIVERSAL DRUM BRAKE TOOL KIT SET
AMR973E: 9PC DISC BRAKE SERVICE TOOL SET
AMR790I-BL: 8PC BRAKE TOOL SET
AMR436L: DISC BRAKE PAD SPREADER
AMR144L: BRAKE SLACK CHECK TOOL
AMM255L: BRAKE SHOE ADJUSTMENT GAUGE MEASURES CLEARANCE BETWEEN
AMR020L: BRAKE CYLINDER RETAINER REMOVER
AMM723L: DISC BRAKE LINNING WEAR GAUGE
AMR435L: DISC BRAKE PAD SPREADER
AMR815E: 21 PCS DISC PARK BRAKE CALIPERS TOOLS

 

 


you can also browse our automotive hand tools by equipment type:

adapter/convertor | chisel & punch | clamp | compressor | cutter | disconnect tool | installer/remover |
pliers | puller | seal/valve tool | socket | tester/gauge | tuning/adjusting | vacuum lifter cups | wrench/ratchet


The Chain Enterprises company is Taiwan's leading manufacturer of OEM automobile tools, products, and accessories. With leading auto tool exporter services to international clients, we are your best choice if you need a supplier for your automotive wholesale business. Our manufacture of auto tooling is managed using a strict quality control process that is ISO approved. Contact us for more details of our solutions for wholesaler and distributor companies.

 

© 2003 - 2010 Chain Automotive Tools | +886-4-2436-1133 | site by www.GCT-Taiwan.com

auto tools supply
CHAIN auto tools & equipment supplies
OEM automotive hand tools manufacturer and supplier/exporter/distributor
automotive tools manufacturer
automotive hand toolsabout CHAIN Auto ToolsOEM automotive tool manufacturer FAQscontact our wholesale hand tools companyhand tools company newsautomotive hand tools catalogget a quote on our hand tools range