CHAIN Auto Tools >> engine repair tools >> page 30
   
Quality OEM Auto Engine Repair Tools: Leading Tool Manufacturer Services

We offer a comprehensive collection of high quality engine repair, maintenance and tuning tools. You will find a range of tools designed to get the job done with minimum
risk of damaging your engine parts while you work. We provide manufacturer services with OEM capabilities allowing you to customize tools

Item
Tool Description
FUEL GAUGE & PUMP SENDER COLLAR WRENCH
An innovative tool for the removal and fitting offuel gauge sender collars. Adjustable to suit for most collars from 89 to 170mm.
Lock in place and then turn with a 16mm wrenchor socket. A damage free method of removing & re-fittingcollars.

SPARK PLUG THREAD REPAIR TOOL
Set(sleeve type) - m14x 1.25. 5pc- m14 x 1.25 (11.2l). 10pc- m14 x 1.25 (17.5l). Use with 14mm socket m14 x 1.25 / m16 x 1.25.
Special designed for repairing the damaged sparkplug thread. Protecting sleeve special designed for interior and external thread.

SPARK PLUG THREAD REPAIR TOOL
Set(sleeve type) - m12x 1.25. 8pc- m12 x 1.25 (12.7l). 8pc- m12 x 1.25 (19l). Use with 14mm socket m12 x 1.25 / m14 x 1.25.
Special designed for repairing the damaged sparkplug thread. Protecting sleeve special designed for interior and external thread.

8PC COOLANT REFILLING FUNNEL SET
Set for refilling coolant and air bleeding. Special funnel design features its spill-free function when disconnecting funnel from radiator adapter. Transparent funnel chamber helps display air bubbles remaining in the coolant. Includes three steel adapters and one universal adapter with three rubber rings.Suitable for imported and domestic vehicles.

OIL FILTER CAP WRENCH (RENAULT)
Size: SW96m/m. Point: 18. Material: ALUMINUM.

ENGINE CRANK ALIGNMENT DAF
Allows the engine crank to be manually adjusted. Allows pinpoint accuracy calibration. Ideal for adjustments to the engine.

DRIVE FLANGE OIL SEAL REMOVER/INSTALLER TOOL FOR (VW, AUDI)
Removing and installing universal drive flange oil seal. Pulling in differential complete with freewheel , pulling off drive flange with gearbox in situ. Screw two M8 x 30 hexagon bolts into the flange.

JAGUAR / LAND ROVER CLUTCH ALIGNMENT TOOL (DOUBLE ENDED)
Replace two tools for one with this cost effective clutch tool. End 1 : Aligner (OEM 308-419)defender - PUMA TD4 2.4l diesel (2007 onwards)to align the clutch disc & pressure plate on installation. End 2 : Adaptor / installer (OEM 303-1096)JAGUAR X200 - S-Type (2003-2007)to align the clutch drive plate and install the SPIGOT BEAR ING.DISCOVERY 3 / discovery 4 TDV6 2.7l diesel (2005~2012)to install the pilot bearing.

2PC UNIVERSAL OIL FUNNEL
Use range: 28~74mm(1.1~2.9"). Application: Universal.

14PC 3/8"DR. DRAIN PLUG SOCKET SET
Size: 6pcs 3/8"DR. HXE: 8,9,10,12,14,17mm. 6pcs 3/8"DR. SQ: 7,8,11,13mm & 5/16",3/8". 1pc 3/8"DR. FEMALE SQ: 10mm. 1pc 3/8"DR. TRIANGULAR. Material: CR-V + MAT FINISHED.

.More automotive engine repair tools from our range:

PAGE 1 >> PAGE 2 >> PAGE 3 >> PAGE 4 >> PAGE 5 >> PAGE 6 >> PAGE 7 >> PAGE 8 >> PAGE 9 >> PAGE 10 >> PAGE 11 >> PAGE 12 >> PAGE 13 >> PAGE 14 >>PAGE 15 >> PAGE 16 >> PAGE 17 >> PAGE 18 >> PAGE 19 >> PAGE 20 >> PAGE 21 >> PAGE 22 >> PAGE 23 >> PAGE 24 >> PAGE 25 >> PAGE 26 >> PAGE 27 >> PAGE 28 >> PAGE 29 >> PAGE 30 >> PAGE 31 >> PAGE 32 >> PAGE 33 >> PAGE 34

Contact us with any questions you have about our auto engine repair tools whether you need to know about our manufacture and export prices, how the tools can be used, our ordering process, or anything else. Our friendly and experienced customer service team is here for you.

- Contact Us / Get a Quote

 

 


you can also browse our automotive hand tools by equipment type:

adapter/convertor | chisel & punch | clamp | compressor | cutter | disconnect tool | installer/remover |
pliers | puller | seal/valve tool | socket | tester/gauge | tuning/adjusting | vacuum lifter cups | wrench/ratchet


The Chain Enterprises company is Taiwan's leading manufacturer of OEM automobile tools, products, and accessories. With leading auto tool exporter services to international clients, we are your best choice if you need a supplier for your automotive wholesale business. Our manufacture of auto tooling is managed using a strict quality control process that is ISO approved. Contact us for more details of our solutions for wholesaler and distributor companies.

 

© 2003 - 2010 Chain Automotive Tools | +886-4-2436-1133 | site by www.GCT-Taiwan.com

auto tools supply
CHAIN auto tools & equipment supplies
OEM automotive hand tools manufacturer and supplier/exporter/distributor
automotive tools manufacturer
automotive hand toolsabout CHAIN Auto ToolsOEM automotive tool manufacturer FAQscontact our wholesale hand tools companyhand tools company newsautomotive hand tools catalogget a quote on our hand tools range