CHAIN Auto Tools » automotive tool directory » pullers
   

Automotive Hand Tools: Puller Equipment

Chain Auto Tools is a supplier of high quality automotive puller tools that are essential aids in removing specific auto parts. Learn about our range of tools for auto repair.

Also see 'installers and removers'

GEAR PULLER (4")
Drop forged chrome vanadium steel for extra strength and durability. The puller can be used for 2 Jaw Type, 3 Jaw Type, and internal pulling way. 4" capacity type.
GEAR PULLER (7")
Drop forged chrome vanadium steel for extra strength and durability. The puller can be used for 2 Jaw Type, 3 Jaw Type, and internal pulling way. 7" capacity type.
2-JAW GEAR PULLER JAPAN TYPE
2 jaw gear puller. Chrome vanadium applied for extra strength and toughness. 7 sizes are available
3-JAW GEAR PULLER JAPAN TYPE
3 jaws gear puller. Chrome vanadium applied for extra strength and toughness. 7 sizes are available


AMB035L

BATTERY TERMINAL / ALTERNATOR BEARING PULLER
The sharp jaws are able to lift off battery case or posts without damage.


AMR684E

SLIDE HAMMER PULLER SET (9WAY)
The full range set includes internal/ external pulling jaws, rear axle puller jaws ... etc.


PUS234E

BLIND HOLE BEARING PULLER SET
Includes 8 pcs different size of attachments.

BEARING INSIDE PULLER
Spread range is from Ø32 to Ø70 mm. Including 15pc spreaders.
INSIDE / OUTSIDE PULLER KIT
SCM440 & S45C material applied for its strength and durability.
WIPER-ARM PULLER SET
Universal puller set. Mostly suitable for VW-AUDI, BMW, FORD, MERCEDEZ, OPEL, PEUGEPT, etc.


AMM414E-1

HARMONIC DAMPER PULLEY PULLER
It can repair the pulley without removing the radiator.


AMM576L

CHAIN PULLER
Specially shaped narrow jaws are designed to fit in between chain links to enable the chain link to be removed or replaced.


PUS241L

PITMAN ARM PULLER
Works on a majority of cars and light trucks.


AMR638V

4PCS STUD PULLER WRENCH
It will not damage the stud.


AMR644E

8PCS STUD PULLER WRENCH SET
8pcs 1/2"DR.: 6mm, 8mm, 10mm, 12mm, 1/4", 5/16", 3/8", 7/16".


AMR401L

SEAL PULLER
Quickly and safely removes oil and grease seals


PUS250D

TRUCK PITMAN ARM PULLER
Suitable for most cars and light trucks.


AMR137L

SPECIAL STEERING WHEEL PULLER
This tool is for the removal of steering wheels on GM Vauxhall/ Ople make of cars.


AMR1031E-1

UNIVERSAL CRANKSHAFT PULLEY & CAMSHAFT PULLEY PULLING AID
This is an universal and ON CAR tool set.


PUS240L

STEERING WHEEL LOCK PLATE PULLER
Fits all U.S. domestic lock plates including tilt and telescoping columns.

FLYWEEL PULLER
Easily extract motorcycle flywheel. Threads sizes are M10 - 1.25, M14-1.5, M16-1.5, M18-1.5 for inner cross bolts and M24-1.0, M27-1.0 for outer bolt.

STANDARD WHEEL COVER PULLER/REP
Standard replacers remove wheel covers quickly and easily without gouging or scratching them or your rim.
BEARING PULLER 19-35
To disassembly electric tool bearing & cars bearing.
Bearing range: φ 19-35mm
Max Loading: 1 Ton
BEARING PULLER 24-55
To disassembly electric tool bearing & cars bearing.
Bearing range: φ 24-55mm
Max Loading: 1.3 Ton
BEARING PULLER 35-80
To disassembly electric tool bearing & cars bearing.
Bearing range: φ 35-80mm
Max Loading: 1.6 Ton
SEAL PULLER
Quickly and easily remover o-ring grease and oil seal, 3different lengths and tips fit nearly all seal applications.
WINDSHIELD WIPER ARM REMOVER
To remove bolted windscreen wiper arms that especially have been rusted or corroded onto the drive-shaft. Stubborn and deep-seated wiper arm is quicly and easily removed by the puller kit.
WIPER ARM PULLER
2 - arm, with Krallex-Legs for extreme narrow sapces and with intergated Leg-Clamp to prevent slipping out of position. Its special shape, the different hook couples (with extra thin straight tips and round tips) and the adjusting nut make this puller almost universal in its rand of application.
WIPER ARM PULLER
2 - arm, with Special-Krallex-Legs and with intergated Leg-Clamp for extreme narrow sapces. Its special shape, the different hook couples (with extra thin straight tips and round tips) and the adjusting nut make this puller almost universal in its rand of application.
WIPER ARM PULLER
2 - arm, with Special-Krallex-Legs and with intergated Leg-Clamp. Its special shape, the different hook couples (with extra thin straight tips and round tips) and the adjusting nut make this puller almost universal in its rand of application. Application on Audi, BMW, Chevrol/Daewoo, Chrysler-Jeep, Citrone, Fiat, Ford, Honda Hyundai, KIT, Land Rover, Mazada, MG-Rover, Nissan, Peugeot, Porsche, VW, MAN, MB, Scania.

 

 

 

 


you can also browse our automotive hand tools by equipment type:

adapter/convertor | chisel & punch | clamp | compressor | cutter | disconnect tool | installer/remover |
pliers | puller | seal/valve tool | socket | tester/gauge | tuning/adjusting | vacuum lifter cups | wrench/ratchet


The Chain Enterprises company is Taiwan's leading manufacturer of OEM automobile tools, products, and accessories. With leading auto tool exporter services to international clients, we are your best choice if you need a supplier for your automotive wholesale business. Our manufacture of auto tooling is managed using a strict quality control process that is ISO approved. Contact us for more details of our solutions for wholesaler and distributor companies.

 

© 2003 - 2010 Chain Automotive Tools | +886-4-2436-1133 | site by www.GCT-Taiwan.com

auto tools supply
CHAIN auto tools & equipment supplies
OEM automotive hand tools manufacturer and supplier/exporter/distributor
automotive tools manufacturer
automotive hand toolsabout CHAIN Auto ToolsOEM automotive tool manufacturer FAQscontact our wholesale hand tools companyhand tools company newsautomotive hand tools catalogget a quote on our hand tools range