home >> air conditioner tools >> cooling system vacuum purge & refill kit
   

COOLING SYSTEM VACUUM PURGE & REFILL KIT

Item No. AMR2000E

Item No:
AMR2000E

Packing:
BLOW CASE
10 SET/ 15KGS/ 16.5KGS/ 3.05'/ CTN

COOLING SYSTEM VACUUM PURGE & REFILL KIT

Directions:

  • Please empty water of radiator. Choose a suitable rubber bush, and place it between cooling system adaptor and radiator tightly

  • Connect cooling system adaptor to vacuum pump, and connect shop air to air connector, then turn on the wsltch

  • Allow air pressure to reach a vacuum level approximately between 20~25 inHG (50~60cmHG) of mercury. Please turn off the switch, and take off the vacuum pump

  • Connect coolant hose to cooling system adaptor and then turn on the switch. (The coolant hose should have filled with coolant, and put in the container which filled with coolant) After minutes, the coolant will flow to the radiator via coolant hose until the needle points zero

  • When you finish all the work, check if the radiator is fully filled with coolant or not. If it is not, please fill the coolant yourself until radiator is full of coolant

 

 

 

 

 

Related tools:

AMR981I: TANK LEAKAGE TESTER KIT
AMR982E: UNIVELSAL RADIATOR PRESSURE TESTER KIT
AMR983E: 25PC RADIATOR PRESSURE TESTER & VACUUM-TYPE COOLING SYSTEM KIT
AMR652I: COOLING SYSTEM& RADIATOR CAP PRESSURE TESTER
AMR653I: COOLING SYSTEM& RADIATOR CAP PRESSURE TESTER
AMR2002E: 24PC UNIVERSAL RADIATOR PRESSURE TESTER KIT

 

 


you can also browse our automotive hand tools by equipment type:

adapter/convertor | chisel & punch | clamp | compressor | cutter | disconnect tool | installer/remover |
pliers | puller | seal/valve tool | socket | tester/gauge | tuning/adjusting | vacuum lifter cups | wrench/ratchet


The Chain Enterprises company is Taiwan's leading manufacturer of OEM automobile tools, products, and accessories. With leading auto tool exporter services to international clients, we are your best choice if you need a supplier for your automotive wholesale business. Our manufacture of auto tooling is managed using a strict quality control process that is ISO approved. Contact us for more details of our solutions for wholesaler and distributor companies.

 

© 2003 - 2010 Chain Automotive Tools | +886-4-2436-1133 | site by www.GCT-Taiwan.com

auto tools supply
CHAIN auto tools & equipment supplies
OEM automotive hand tools manufacturer and supplier/exporter/distributor
automotive tools manufacturer
automotive hand toolsabout CHAIN Auto ToolsOEM automotive tool manufacturer FAQscontact our wholesale hand tools companyhand tools company newsautomotive hand tools catalogget a quote on our hand tools range